jvvh 205 Flash (like a factory) to convert 2500a Pansats and Clones to 2700a Pansats
jvvh 205 Flash (like a factory) to convert 2500a Pansats and Clones to 2700a Pansats
Here is the jvvh 205 Flash (like a factory) to convert 2500a Pansats and Clones to 2700a Pansats. Here are instructions on how to convert real 2500a Pansats, Fortec Ultras, and other clones of the 2500a Pansat.

This is how to load your 2500,FLU or clone to a 2700 clone via the SERIAL PoRT
********* NOTE NOTE ********
********* NOTE NOT for JTAG NOTE ********
********* NOTE NOTE ********

You will Need a Pansat remote. From my understanding the Fortec remote should work.


If you want to keep your installation settings (lnbs, switches, sats, etc.) and your channels, you will have to save your Channel List with Channel Master. Or load it into Channel Master and keep it open in the background.


1. Open/Run the Blacklist updater and straight cable
2. Make sure BIN is Selected not BOOT you are writing a Bin
3. Click select BIN
4. Choose j27_205_1.bin
5. Reboot receiver, on first light/dash, Click write bin. let it write
When it is done, Be PATIENT!!!! let it reboot after 2-3 minutes you will see B-75 Flash on display of receiver.
6. Click select BIN
7. Choose the most up-to-date jvvh bin.
8. Reboot receiver on first light Click write bin. let it write. let it reboot after 1 minute you will see B-75 Flash on display of receiver.
9. now Rewrite your Channel list back, BUT, BIG BUT, you must now select the 2700 settings in Channel master.
10. reconnect to Tv, do a factory reset,set sats and select default key from parental options(key menu) let it roll
11. wait for next round
12 use only modded 2700 bins from jvvh, jeep yj, ukronic and chanceyT bins when upgrading.
I like the 1.4 Blacklist Loader.

I will include the 205 bin that you need to get things rolling.
note: the most current upgrade bins are in the fortec lifetime ultra section.