why does it say no single on all networks

welcome to the community :)

how come it said no single on all networks

hello and welcome to ftabins.

make yourself at home and enjoy.

Welcome to the best FTA site on the world = FTABINS.NET

welcome to ftabins. no signal means no signal. your dish is not on a sat.

Welcome to FTABins.net your #1 fta site, read a little, learn a lot, ask a good question, get good answer, make new friends


here are a few links you will be interested in checking out

site rules
http://www.ftabins.net/announcement.php?f=68

You will find a lot of info you need in the General guides and info section
http://www.ftabins.net/forumdisplay.php?f=244

For all your files go to this link
http://www.ftabins.net/forumdisplay.php?f=29

Welcome to ftabins:)

:welcome:
everyone here will help if you have any problems:)

Welcome to ftabins:thmbup:

Hi Lungfao!

Welcome to FtaBins!
If you have "No Signal" it could be a zillion things....in order to help you find out why we're gonna need some information. Any time you have an issue or question take a few seconds to narrow down your issue as best as possible. No Signal could be caused by not having your Dish wired or Aligned correctly! Sometimes people may not even have a Dish....haha Sounds Crazy but I am sure it has happened......

Please read this thread ===>
How To Ask For Help: http://ftabins.net/showthread.php?t=11651

Anytime you have a Question or Comment on a particular Receiver you should post in the appropriate models thread (Select yours Here) ===>http://www.ftabins.net/forumdisplay.php?f=11

If you have a question, take an extra few seconds to scan through this section here before you post your question....===>FTA General Guides & Info: http://www.ftabins.net/forumdisplay.php?s=&daysprune=-1&f=244

Now With that out of the way.......haha.....

For "No Signal" I would try this.......(I am going to assume that your Dish is Connected & Aligned Correctly to your Receiver.......)

1) Load your Newest Factory File for your Receiver (I am not sure what receiver you have but select your model here ===>http://www.ftabins.net/forumdisplay.php?f=35 )

2) Re-Install the newest Bin File for your Receiver (I am not sure what receiver you have but select your model here ===>http://www.ftabins.net/forumdisplay.php?f=35 )

3) Do a Factory Reset - This will reset your Receiver Settings, and will not remove your newly loaded Bin File.

4) Do an AutoScan (If you can) Standard if you can't do an Auto Scan

If this doesn't get you back up than Try this...........

1) Turn off your Receiver using the back switch.

2) Disconnect your LNB cable from the back

3) Turn on your Receiver, (Isn't that the opening lines of a great Nazareth Song!....haha) let it cycle on until is shows "No Signal"

4) Turn Off your Receiver & Reconnect your LNB Cable

If this doesn't fix you up..........Check to make sure you have a Dish at all..........hahaha

I hope this helps!

Good Luck & Again Welcome to FTABins!

Nova Sounds

Welcome lungfao, to your ONE STOP FTA SHOP

Help us Help U

So you have a problem, copy and paste the form from here http://www.ftabins.net/showthread.php?t=27664 into a reply in this thread, fill in the info, along with as much detail as u can.


Pull up a chair, look around, take off your boots and stay a while!

New to the game look!
FTA - General Information/Guides/How-To's LINK: http://www.ftabins.net/forumdisplay.php?f=244

Files (pick ur brand) LINK: http://ftabins.net/forumdisplay.php?f=35

Guides & how to's Link: http://ftabins.net/forumdisplay.php?f=303

Check out the Rookies Section if your new Link: http://ftabins.net/forumdisplay.php?f=179

Admins are great, members are helpful, and theres TONS of info. Can't find something just ask in the forums! Try to find the appropriate section to post, ie your receiver brand etc!

When it comes to files always Check not ONLY the post count of the user, but their rep points as well, if they are VIP or higher and have good rep you can rest assured the file should be safe, but as with all Files, Use at your own risk!