This is a c/p with the attached file(s), it is at the request of Slip :)

__________________________________________________ ___
SatCruiser 101 plus + Boot R3R to R3X can be done..

uncover and look at the board by the power cord ..

if you have an 8mb memory you only can use an R3R Boot...

if you have a 16mb memory you can use an R3R or R3X Boot...

if you have board revision 2.2A, 2.2B, 5.3 or 5.3A-1 then it has 16mb memory ...

also look at the memory chip and see if you have an 8MB or a 16MB..

I can be wrong on the revisions !!!!!

Download the attachment(s) and do the following..

1. use UploaderLite.exe and make sure it is set to "BOOT" and not "MAIN" and load "BOOT_R3R_to_R3X_1.25.bin".

2. use UploaderLite.exe and make sure it is set to "BOOT" and not "MAIN" and load "BOOT_R3X_1.25_cpch.bin".

3. use UploaderLite.exe and make sure it is set to "MAIN" and not "BOOT" and load "R3XSatCruiserFactoryfile.bin".


Warning: Use at your own risk......