just call me amboy from san jose ca. new member of this great community and also take the opportunity say big thanks to KENMORESP who make a big help on my problem on my coolsat 6100 where i can fine files that i need to fix E-01 and set by step tutorial again thanks KENMORESP your the man thmbup:

Welcome amboybaste to ftabins.net :)

Welcome amboybaste, to ftabins.net, a site full of friendly & helpful members. Please enjoy!

greetings amboybaste and way to go kenmoresp always on top of things

Here is the file. I will track down the other thing for you. welcome to our site. I think you will like it here much better than the other one. It is much easier to find what you need.

Coolsat 6100 Factory Bin v112 (http://www.ftabins.net/showthread.php?t=28784)

Here is what you were needing. check out the coolsat section and the guides section. You can post questions, thoughts and ideas to help other members there, as well as find a lot of really good info.


If you didn't get you receiver running yet, check this out. I found it on another site. See if it will help you.

HOW TO RECOVER FROM THE E-01 ERROR
To Recover from the dreaded E-01 ERROR simply follow my RS232 loading instructions But REPEAT step 4 and 5 Twice BEFORE moving on to step 6

NOTE
ALWAYS Unplug your receiver BEFORE disconnecting Or Connecting your Coax cable Or RCA cables !! FAILURE to do so WILL damage your receiver !


1) Download and unzip both the ( COOLSAT6100_FAC_V0112 (http://forums.f2atv.com/showthread.php?t=158396)) and NorW latest release

2) Connect your receiver to your computer using your RS232 cable.

3) Open your Coolsat 6100 Loader click the file button and load your Coolsat_6100_Fac_Vo112 into your loader

4) Timing is everything on this step ! Put your mouse over the download button and as soon as you turn the Back power switch on your receiver ON click the download button
If your to slow it will NOT load and you must Repeat this step !

5)When your receiver reboots itself Or you see this ---- turn off the back switch and reconnect it to your TV then click Menu on your remote and then go to Installation screen and select SYSTEM RECOVERY and click YES to (System restore to Factory Default) when the factory reset is finished set the Language of choice and then set your time zone. After setting the time zone the receiver will ask if you want to Auto detect your satellites and switch settings. Say NO at this time !


6)Now Repeat the First 5 steps to load the Latest Coolsat6100_NorW-bin !
BUT this time say YES to Auto Detect and it will auto set your LNB type and switch settings and then scan All the satellites your pointed at !



NOTE
ALWAYS Unplug your receiver BEFORE disconnecting Or Connecting your Coax cable Or RCA cables !! FAILURE to do so WILL damage your receiver !