pervous
09-10-2008, 02:37 PM
Nfusion group is pleased to release version (nf_hd_v1.3sR_01F)
of Nfusion HD software with full S.U.N.S. phase 2
support
-install UHF Module before you start
(follow pdf I posted)
-ALSO NOTE THE FAN IN UNIT DOES NOT RUN TILL 3RD
PARTY SOFTWARE is installed. THE PLASTIC FILLER ON
BACK IS FOR JUST THAT NOT ANYTHING MORE IF YOU
INSTALL BOARD ITS NO LONGER NEEDED OR PUT ON ANYTHING.
-things to know before you load the softare. one
from factory bin you will see a screen asking for
language (pick english) then scroll to 'storage'
set to 'front' and 'usb' then you will see 'upgrade'
software hit ok you then should see your files
from your memory stick (find the one that starts
with nf_hd_v1.3sR_01.bin this is the main software
bin after you confirm it is the file you want to
load 'hit green' button on remote 'wait' till it
completes 'when it does' it will prompt you hit
ok to reboot (software is now loaded) after new
bin is loaded you will see softare load on front panel
box setup (do factory reset to start guided setup)
-now you move to guided setup at this point in
time you should see Language screen again
follow the screens to setup your LNB's 'note:
besure to pick correct lnb the 'info' icon on
the remote changes lnb type then you pick the
satellite to scan with 'ok' button every screen
has 'what' buttons do on them
once all satellites are scanned then goto 'memu'
'installation' '*******' then back out this connects
DHCP
-also pvr (is set to front or back usb) reords
via 'red' button on remote stores file on your
attached drive (we will continue to get rest of
the functions completed in upcoming bins) we have
a set plan for this (did not want to hold up bin)
i am more than sure most will like this function
this records in .ts format very common but do note
your pc you use must support HD for his to play
1080x1920 (no format of drive is needed) and you
can playback content on pc box supports full pvr
functions
in this release is (version nf_hd_v1.3sR_01)
also factory bin (nf_HD_factory)
bin loader for pc (not needed) usb is fine
UHF board install instructions
ippvr HD (beta) v1.5HD
-THIS IS ONLY FOR HD BOX
of Nfusion HD software with full S.U.N.S. phase 2
support
-install UHF Module before you start
(follow pdf I posted)
-ALSO NOTE THE FAN IN UNIT DOES NOT RUN TILL 3RD
PARTY SOFTWARE is installed. THE PLASTIC FILLER ON
BACK IS FOR JUST THAT NOT ANYTHING MORE IF YOU
INSTALL BOARD ITS NO LONGER NEEDED OR PUT ON ANYTHING.
-things to know before you load the softare. one
from factory bin you will see a screen asking for
language (pick english) then scroll to 'storage'
set to 'front' and 'usb' then you will see 'upgrade'
software hit ok you then should see your files
from your memory stick (find the one that starts
with nf_hd_v1.3sR_01.bin this is the main software
bin after you confirm it is the file you want to
load 'hit green' button on remote 'wait' till it
completes 'when it does' it will prompt you hit
ok to reboot (software is now loaded) after new
bin is loaded you will see softare load on front panel
box setup (do factory reset to start guided setup)
-now you move to guided setup at this point in
time you should see Language screen again
follow the screens to setup your LNB's 'note:
besure to pick correct lnb the 'info' icon on
the remote changes lnb type then you pick the
satellite to scan with 'ok' button every screen
has 'what' buttons do on them
once all satellites are scanned then goto 'memu'
'installation' '*******' then back out this connects
DHCP
-also pvr (is set to front or back usb) reords
via 'red' button on remote stores file on your
attached drive (we will continue to get rest of
the functions completed in upcoming bins) we have
a set plan for this (did not want to hold up bin)
i am more than sure most will like this function
this records in .ts format very common but do note
your pc you use must support HD for his to play
1080x1920 (no format of drive is needed) and you
can playback content on pc box supports full pvr
functions
in this release is (version nf_hd_v1.3sR_01)
also factory bin (nf_HD_factory)
bin loader for pc (not needed) usb is fine
UHF board install instructions
ippvr HD (beta) v1.5HD
-THIS IS ONLY FOR HD BOX