viruscauser
01-30-2009, 09:16 PM
c/p fwank7
The Jvvh-Team-PUFF_Ver1.0.3_ConvertBOX_(Lzma) 1MB bin is much like the Ukr_PUFF1.0.1_ConvertBOX 1MB bin.
This 1MB bin file is similar to a Jtag file but one that can be loaded threw serial port.
For those who's receivers are still converted to b75 or PUFF or is stuck on " F " you can convert to Lzma using the
Jvvh-Team-PUFF_Ver1.0.3_ConvertBOX_(Lzma) bin then loading the current Lzma bin (which currently is V207) afterwords.
Do a Factory reset after the latest LZMA Bin has been loaded before scanning.
You will only need to use one Loader (The one you normally use) and Click download on Loader at first " P " or first " b " as you normally would.
HOW TO:
Quote:
1). Open loader you normally use (eg. FortecStarSTB or BL_Updater1.4 Loader).
Click BIN or FILE and choose Jvvh-Team-PUFF_Ver1.0.3_ConvertBOX_(Lzma) bin.
Turn receiver ON and first " P " or first " b ".
Click Download on Loader.
After write completes receiver will pause on ( l ) for about a 1 minute or less
then receiver will reboot with rolling P.U.F.F.
At this point you can either turn receiver OFF from back switch or leave receiver ON.
2). Click BIN or FILE on Loader and choose V207_Lzma bin.
If your turned receiver OFF from back switch turn receiver ON and first " P. ".
Click Download on Loader.
If you left receiver ON then wait for P.U.F.F. to start rolling.
Click Download on Loader.
After write completes receiver will scroll threw P.U.F.F. (twice) pausing on " F. " for 10 - 12 seconds then display " ON ".
**You will lose your Antenna Setup settings and Channel list as well so you will have to put back in your Antenna Setup settings and rescan your Sats.
Before rescanning your Sats I recommend doing a System Reset in Main Menu first then when receiver reboots to ON and ENGLISH on TV screen, push OK on remote put in your Antenna Setup settings and rescan your Sats. I also recommend doing a Blindscan if using Standard LNB's.**
After the Loading of Jvvh-Team-PUFF_Ver1.0.3_ConvertBOX_(Lzma) bin to receiver is complete and if you have a hard time loading the V207_Lzma bin to receiver then turn receiver OFF from back switch, Close loader then Re-Open loader before attempting to load the V207 bin to receiver again.
Here is How Too one more time and the way I recommend doing it to save you the hassle during the process.
RECOMMENDED HOW TO.
Quote:
1). Open Loader you normally use (eg. FortecStarSTB or BL_Updater1.4 Loader).
Click BIN or FILE and choose Jvvh-Team-PUFF_Ver1.0.3_ConvertBOX_(Lzma) bin.
Turn reciever ON and soon as you see the first " P " or " b ".
Click Download on Loader.
Write will complete and receiver will pause on ( l ) for about a 1 minute or less
then receiver will reboot with P.U.F.F. rolling across the dislay screen.
Turn receiver OFF from back switch.
2). Close Loader then Re-Open Loader.(eg. FortecStarSTB or BL_Updater1.4 Loader).
Click BIN or FILE and choose V207_Lzma bin.
Turn receiver ON and soon as you see the first " P. ".
Click Download on Loader.
After write completes receiver will reboot with P.U.F.F. P.U.F.F. pausing on " F. " for 10 - 12 seconds then display " ON ".
Next, do a Factory Reset. Once again you will have to put back in your Antenna Setup settings and rescan your Sats.
Jvvh-Team-PUFF!!
The Jvvh-Team-PUFF_Ver1.0.3_ConvertBOX_(Lzma) 1MB bin is much like the Ukr_PUFF1.0.1_ConvertBOX 1MB bin.
This 1MB bin file is similar to a Jtag file but one that can be loaded threw serial port.
For those who's receivers are still converted to b75 or PUFF or is stuck on " F " you can convert to Lzma using the
Jvvh-Team-PUFF_Ver1.0.3_ConvertBOX_(Lzma) bin then loading the current Lzma bin (which currently is V207) afterwords.
Do a Factory reset after the latest LZMA Bin has been loaded before scanning.
You will only need to use one Loader (The one you normally use) and Click download on Loader at first " P " or first " b " as you normally would.
HOW TO:
Quote:
1). Open loader you normally use (eg. FortecStarSTB or BL_Updater1.4 Loader).
Click BIN or FILE and choose Jvvh-Team-PUFF_Ver1.0.3_ConvertBOX_(Lzma) bin.
Turn receiver ON and first " P " or first " b ".
Click Download on Loader.
After write completes receiver will pause on ( l ) for about a 1 minute or less
then receiver will reboot with rolling P.U.F.F.
At this point you can either turn receiver OFF from back switch or leave receiver ON.
2). Click BIN or FILE on Loader and choose V207_Lzma bin.
If your turned receiver OFF from back switch turn receiver ON and first " P. ".
Click Download on Loader.
If you left receiver ON then wait for P.U.F.F. to start rolling.
Click Download on Loader.
After write completes receiver will scroll threw P.U.F.F. (twice) pausing on " F. " for 10 - 12 seconds then display " ON ".
**You will lose your Antenna Setup settings and Channel list as well so you will have to put back in your Antenna Setup settings and rescan your Sats.
Before rescanning your Sats I recommend doing a System Reset in Main Menu first then when receiver reboots to ON and ENGLISH on TV screen, push OK on remote put in your Antenna Setup settings and rescan your Sats. I also recommend doing a Blindscan if using Standard LNB's.**
After the Loading of Jvvh-Team-PUFF_Ver1.0.3_ConvertBOX_(Lzma) bin to receiver is complete and if you have a hard time loading the V207_Lzma bin to receiver then turn receiver OFF from back switch, Close loader then Re-Open loader before attempting to load the V207 bin to receiver again.
Here is How Too one more time and the way I recommend doing it to save you the hassle during the process.
RECOMMENDED HOW TO.
Quote:
1). Open Loader you normally use (eg. FortecStarSTB or BL_Updater1.4 Loader).
Click BIN or FILE and choose Jvvh-Team-PUFF_Ver1.0.3_ConvertBOX_(Lzma) bin.
Turn reciever ON and soon as you see the first " P " or " b ".
Click Download on Loader.
Write will complete and receiver will pause on ( l ) for about a 1 minute or less
then receiver will reboot with P.U.F.F. rolling across the dislay screen.
Turn receiver OFF from back switch.
2). Close Loader then Re-Open Loader.(eg. FortecStarSTB or BL_Updater1.4 Loader).
Click BIN or FILE and choose V207_Lzma bin.
Turn receiver ON and soon as you see the first " P. ".
Click Download on Loader.
After write completes receiver will reboot with P.U.F.F. P.U.F.F. pausing on " F. " for 10 - 12 seconds then display " ON ".
Next, do a Factory Reset. Once again you will have to put back in your Antenna Setup settings and rescan your Sats.
Jvvh-Team-PUFF!!